overview for Thunder
I just tried multiple different infills and layer heights and coque iphone 6 zokko they all have the same issue where coque iphone 6 s plus diamant they break along the layer lines or twist itself apart. iphone 11 case coque huawei coque samsung Like you pointed out, the layer lines are horizontal (I have a vertical test print coming out right now as a matter of fact) and this seems to constantly be the main point of failure. coque samsung bijoux pas cher I was able coque iphone xr transparente rose to borrow a (very old) torque wrench and was able to get 10 pound feet of torque before the head broke off in the same spot even with coque iphone 4 minion silicone 100% infill+more extrusion+higher coque iphone 6 tata temperature (190c and 200c both achieved 11 pound feet torque) much lower than what I had comment retirer la coque iphone 5 got before. coque huawei coque iphone coque iphone I still want to greatly improve this coque iphone 7 silicone integrale number, any coque iphone 5s van suggestions
I edit this coque iphone xr kaws comment after I measure coque iphone coque iphone xr cuir rouge x animaux the vertical layer print, but I don coque iphone xr mermaid see this increasing much with PLA and I might need to get another filament as the snapped heads of the previous prints had twisted greatly across the entire head before coque iphone 5c utile snapping.
Great questions and I am coque iphone swag disney thankful for your reply.
I'll answer your questions in order.
Matchbox PLA (I'm new to 3D printing and this is the only spool I have)
these are failed parts, all of which broke at the 3/8 inch socket head due to a lack of infill and shell thickness. bracelet bijoux They broke during testing to see if the coque iphone 6 chargeur induction ratchet mechanism would slip under pressure or if instead there would be a failure of the material coque iphone 7 plus pokemon and not the mechanism, which is coque iphone 5c islam what happened.
The reason for the lack of infill and shell thickness is for quick printing. coque iphone iphone 11 case coque iphone I was experimenting with blade coque iphone 6 husqvarna shapes to find the least resistance and better fitment so I wasn't worried about strength. coque huawei coque huawei However the parts that still have the neck ( the 3/8 inch square bit ) are 30 40% infill with 6 perimeter layers which is what I want coque iphone 5 va sur 5c the final prints to be.
main specs that were changed between version were blade size (height), Blade angle, blade shape, main drive size ( the part with fins and coque iphone kaamelott the neck was constantly being coque iphone xr pois resized to fit properly within the chassis without any unwanted movement ), and other fitment adjustments. coque samsung coque samsung coque huawei (Not sure if that's what you coque iphone 5s amusante coque iphone xr staff meant by controls. coque iphone If you're asking about how I measured strength I used screws that I knew where at a specific torque using another wrench that I broke loose with the printed drive)
I didn't use an actual torque testing since I don't have one
the design was 100% created by me in blender using basic tools.